This article contains some simple samples of Arbor studies that can be imported into your facility.  Download links are located at the bottom of the page.  These sample studies are a great way to get started with Arbor.  They provide a framework for some of the most common application for Fault Tree Analysis including SIL Verification calculations and Focused Quantitative Risk Assessments (QRA).

To import these samples into your facility, perform the following steps.

1.)  Click a link at the bottom of the article to download the sample study and save the downloaded file to your local hard drive.

2.) On the Study Manager Page, select a Facility where you would like to import the sample study.

3.) From the Study Manager page, click the Import Button in the main action ribbon and select the sample study file that was downloaded.

3.) Following step 3, the Arbor application will load and display the data for the sample study.  You can now begin editing the sample study.

 

SAMPLE STUDY LINKS

By |2018-02-24T19:01:07-05:00November 27th, 2017|0 Comments