Next Live Webinar

SIS and BPCS Component Sharing

There is still some confusion about a key attribute of good Safety Instrumented Systems (SIS) design – specifically separation of Basic Process Control Systems (BPCS) and Safety Instrumented Systems (SIS).

In this live webinar, we will cover:

Definitions and Standards Requirements
Assessment of Independence – Shared Valve System
Quantitative Justification of Shared Component
Additional Standards Requirements
Design of SIS Separation Workflow

Date: Tuesday 16 August 2022
Time: 9 AM Eastern, 1:00 PM Greenwich Mean Time (GMT)

SIS and BPCS Component Sharing

Join us for our next webinar on sharing components between your Safety Instrumented System (SIS) and your Basic Process Control System (BPCS). Webinar: SIS and BPCS Component Sharing Date: Tuesday 16 August 2022 Time: 9 AM Eastern, 1:00 PM Greenwich Mean Time (GMT) 
Name(Required)
Address(Required)
Optional: Do you want us to contact you?

Previous Webinar

Determining and Documenting Appropriate Leak Tightness Requirements

This webinar was well attended with many questions and comments, and you asked for more. The webinar went into detail about the differences between tight shut off and leakage rate methods, the standards, and how to determine the correct leak requirements for your situation.

We did not record the webinar, however it is available on our Process Safety Training Center site.

If you want, you can request a 3-day Process Safety Training Center trial request and view the recorded training session as well as other training available on the site. Click here to request the trial, https://www.kenexis.com/request-trial-access-for-24-hours-to-the-process-safety-training-center/

Once you log into the site, there is a Training button in the button bar to the right shown in the image below. That button will take you to training. Once you are in the Training section, the Browse Available Courses link near the bottom will take you to the course list. You want the Safety Requirements Specifications (SRS) course. Once the course is open, click on the Subscribe button to enter the course and Section 14 – Valve Leakage Rates covers Standards Requirements, Leak Tightness Definitions, Selecting Leakage Class Approaches, and Valve Leakage Specification Workflow. You can even take the quiz at the end if you want.

For more information about an annual subscription to the Process Safety Training Center, visit https://www.kenexis.com/technical-safety-training/

Recorded Webinar

Risk Assessment and Safeguarding of Lithium Ion Battery Containing Facilities

Register here to get the link to the recorded webinar on Risk Assessment and Safeguarding of Lithium Ion Battery Containing Facilities.
Name(Required)
Address(Required)
Optional: Do you want us to contact you?

Recorded Webinar

Problems Blending H2 into Natural Gas (Methane)

Register here to get the link to the recorded webinar on Problems Blending H2 into Natural Gas (Methane) including references to the papers and information presented in the video.
Name(Required)
Address(Required)
Optional: Do you want us to contact you?