Thursday, April 28, 2011
2:00 PM EDT
Duration:1 hr
SIS Lifecycle Overview
What is a Safety Instrumented System (SIS)? How does it differ from regulatory control? Why do I need one and how do design it properly? This webinar will discuss the concept of a safety lifecycle and how you can apply design standards to meet your safety requirements, while achieving a cost-effective and low-maintenance solution.
Register: Click Here
Recordings: Click Here
|
Thursday, June 09, 2011
2:00 PM EDT
Duration:1 hr
Process Hazard Analyses (PHAs)
I’ve heard of corporate or legal requirements that mandate facilities to conduct a PHA. Is that applicable to my site? What personnel and materials do I need to do it? What are the requirements? Is a PHA the same as a “Hazop?” This webinar will discuss good practices that will enable you to become an informed participant at the PHA discussions.
Register: Click Here
Recordings: Click Here
|
Thursday, August 25, 2011
2:00 PM EDT
Duration:1 hr
Safety Integrity Level (SIL) Selection
I am planning a safety system and heard I need a SIL – is SIL 3 enough or too much? How does a SIL differ from a PHA? What are the requirements and techniques do proper SIL selection? This webinar will discuss design requirements for safety systems, and provide the fundamental knowledge to help you tackle this critical task.
Register: Click Here
Recordings: Available a few days after webinar
|
Thursday, October 27, 2011
2:00 PM EDT
Duration:1 hr
SIL Verification and Conceptual Design
Now that I’ve established a SIL for my functions, how do I know my hardware achieves the set targets? What parameters impact the function performance? What do I account for diagnostics and testing? Is there some kind of reference where these relationships are described? This webinar will discuss the crucial activity of verifying your design and performance requirements have been met.
Register: Click Here
Recordings: Click Here
|
Thursday, December 08, 2011
2:00 PM EDT
Duration:1 hr
Safety Requirements Specification (SRS)
I’ve determined design requirements and performed verification calculations. How do I tie together all the information for someone to build my SIS? What have I not addressed yet that is important to include in the design package? This webinar will discuss the SRS, what it includes, what it should NOT include, and why it is important for your project to minimize costly “surprises.”
Register: Click Here
Recordings: Click Here
|
Thursday, March 01, 2012
2:00 PM EDT
Duration:1 hr
Test Plans
Once the system design has been established and fabrication is underway, it is time to think about preparing test plans. Without proper testing even the best of safety systems is useless, or worse. This webinar will discuss establishing comprehensive, practical testing procedures. Also, how to design test plans to return valuable information on the real world performance of your equipment.
Register: Click Here
Recordings: Available a few days after webinar
|
